Site Map Icon
RSS Feed icon

April 20, 2014

Member Login
Username:

Password:


Not registered yet?
Click Here to sign-up

Forgot Your Login?


Paused
2014 Q1 Signalman's Journal
2013 Q4 Signalman's Journal
2013 Q3 Signalman's Journal
2013 Q2 Signalman's Journal
2013 Q1 Signalman's Journal
2012 Q4 Signalman's Journal
2012 Q3 Signalman's Journal
2012 Q2 Signalman's Journal
2012 Q1 Signalman's Journal

Contact Elected Officials!

Organize Today
Learn more about organizing your workplace!

Click Here

Weather Report
Importance of Clear Safety Procedures for the Temporary Removal from Service of Highway-Rail Grade Crossing Warning Systems and Wayside Signal Systems
Updated On: Jun 04, 2013

In response to a National Transportation Safety Board recommendation, the Federal Railroad Administration (FRA) issued Safety Advisory 2013–04. Its purpose is to reemphasize the importance of clear and precise railroad procedures to ensure the safety of the traveling public and railroad employees when highway-rail grade crossing warning systems and wayside signal systems are temporarily removed from service for purposes of testing, inspection, maintenance, or repair. The FRA previously made related recommendations to railroads regarding the importance of clear safety procedures to ensure the safety of highway-rail grade crossing warning systems and wayside signal systems in Safety Advisory 2002–01.

Over the past year, two serious incidents have resulted from the failure of railroad personnel to follow appropriate safety procedures when removing grade crossing warning devices and wayside signal systems from service for repair. A brief review of these incidents may help illustrate the critical importance of railroads having clear and precise safety procedures in place when testing, inspecting, maintaining, or repairing highway-rail grade crossing warning systems and wayside signal systems. It is our responsibility as Signalmen to ensure these procedures are followed.

One incident involved a fatal collision between a southbound passenger train and an automobile that was eastbound at a highway-rail grade crossing. The warning system had been removed from service and did not activate as the train approached the crossing. The train was equipped with a forward-facing video camera that recorded (1) that the gate arms were in the upright position, and (2) that the grade crossing warning lights were deactivated as the train traveled through the highway-rail grade crossing and struck the automobile. The automobile driver was fatally injured as a result of the collision.

The second incident involved the derailment of a passenger train that had entered a yard track from the main track. Locomotive video- and event recorder data show that the passenger train was proceeding on a clear signal through a power-operated switch that had been aligned in the reverse position toward the yard. After traveling at a speed of 61 mph through a turnout that was limited to 15 mph for movement onto a 5 mph yard track, the passenger train derailed about 254 feet beyond the power-operated switch. Four cars and two locomotives derailed upright and emergency responders reported that 14 persons were injured, 8 of whom were transported to area hospitals.

Federal Railroad Administration Safety Advisory 2013–04


DELEGATES
Click Here to Book your Room for the 2014 BRS Convention

ONLY adults 18 and over
are required to be
reported as guests

Registering more than
2 adults, will result in a
$10 fee for each
additional guest

Special Group Rate
Available until June 9, 2014

Upcoming Events
Local Chairmen's Training
Apr 24, 2014
BRS Grand Lodge
917 Shenandoah Shores Road
Front Royal, VA 22630
Distribute Dues Cards & Dues Payment Deadline
Apr 30, 2014
BRS
IRS 941 1st Quarter Filing Deadline
Apr 30, 2014
BRS
Deposit Payroll Tax
May 15, 2014
BRS
Form 990, 990EZ, or 990N Due
May 15, 2014
BRS

Brotherhood of Railroad Signalmen
Copyright © 2014, All Rights Reserved.
Powered By UnionActive™

Privacy Policy | Terms of Service
Visit Unions-America.com!

Top of Page image